DUPLEX INTELLIGENT PUMP CONTROL PANEL FOR SEWAGE LIFTING PUMP, WITH THREE PHASE, AC380V/50HZ

Model L932-S
Eliminates the need for at least 5 water level sensor or 3 float switches: stop-level, normal- level for one pump, high-level for two pumps, overflow-alarm level. Thus significant cost-savings result from dramatically reduced purchasing and clearing of sensors or float switch.
More secure because it uses level transmitter, whereas sensors or float switch often fail because of the effect of sludge.
Different water levels (depth) for starting or stop the pumps can be set via LCD screen directly and real time depth value displaying;
Model L93S-S is specially designed for duplex sewage pumping system, by adopting level transmitter with 0.5-4.5V analog signal, pump user can easily set the different liquid depth for sewage pump operation and observe the dynamic liquid depth in the sump or sewage tank.

Typical usage scenarios include:
-Chemical, petroleum, pharmaceutical, mining, paper making industry
-Cement plant, steel plant, power plant, coal processing industry
-Municipal waste water treatment plants
-Drainage system
-Municipal engineering
-Construction site

Application & Control characteristic:
Connecting 0.5-4.5V level transmitter to replace liquid probe, float switch
Pump start and stop according to different depth value setting

Duplex pump control
• Main pump / standby pump automatically alternate
• Main pump / standby pump automatically switch against malfunction
• Standby pump participate running if more flow coming

Main technical data:
• Start type: Direct on line (DOL)
• Qty of controller pump: single pump
• Rated input voltage : AC380V, Three phase 50HZ/ 60HZ
• Rated output power : 0. 75kw-4kw (1 hp-5. 5hp) – 5. 5kw-11kw (7.5hp-15hp) – 15kw (20hp)

Max Motor Output at 380V 3Ph		Relay Max Range(A)
HP	KW	12A
1.0	0.75
1.5	1.1
2.2	1.5
3.0	2.2
5.0	3.7
5.5	4
7.5	5.5	25A
10.0	7.5
15.0	11
20.0	15	32A

Product function
• Over load protection
• Pump stalled protection
• Dry run protection with sensor free
• Under voltage protection
• Over voltage protection
• Rapid cycle protection
• Open phase protection
• Phase reversal protection
• Three phase unbalance protection
• Pump shaft anti-rust protection

Product feature
• Pump start and stop depth value can be easily setting on the LCD screen
• Pump last five faults record displaying
• Pump accumulative running time displaying
• Presenting one dry contact point (BA port) for BMS system
• Present RS485 port (A+ / B－)
• Remote monitor available (at option)

Main installation data
• Working temperature: -25℃– +55℃
• Working humidity: 20%–90%RH, no drips concreted
• Degree of protection: IP54
• Install position: Wall mounting
• Unit dimension (L x W x H): 302 x 240x 120mm

DUPLEX INTELLIGENT PUMP CONTROL PANEL FOR PRESSURE BOOSTING PUMP, WITH THREE PHASE, AC380V/50HZ

Model L932-B
Model L932-B is specially designed for duplex pressure booster pumping system, by adoption of pressure transmitter (0.5-4.5V), pump user can easily set the different pressure value and observe the dynamic pressure value in the pipeline.

Typical usage scenarios include:
-Houses
-Flats
-Holidays houses
-Farms
-Water supply from wells
-Irrigations of greenhouses, gardens, agriculture
-Rain water reuse
-Industrial plants
-Construction site

Application & Control characteristic:
Connecting 0.5-4.5V pressure transmitter to replace pressure switch
Pump start and stop according to different pressure value setting

Duplex pump control
• Main pump / standby pump automatically alternate
• Main pump / standby pump automatically switch against malfunction
• Standby pump participate running if more pressure required

Main technical data:
• Start type: Direct on line (DOL)
• Qty of controller pump: single pump
• Rated input voltage : AC380V, Three phase 50HZ/ 60HZ
• Rated output power : 0. 75kw-4kw (1 hp-5. 5hp) – 5. 5kw-11kw (7.5hp-15hp) – 15kw (20hp)

Max Motor Output at 380V 3Ph		Relay Max Range(A)
HP	KW	12A
1.0	0.75
1.5	1.1
2.2	1.5
3.0	2.2
5.0	3.7
5.5	4
7.5	5.5	25A
10.0	7.5
15.0	11
20.0	15	32A

Product function
• Over load protection
• Pump stalled protection
• Dry run protection with sensor free
• Under voltage protection
• Over voltage protection
• Rapid cycle protection
• Open phase protection
• Phase reversal protection
• Three phase unbalance protection

Product feature
• Pump start and stop pressure value can be easily setting on the LCD screen
• Pump last five faults record displaying
• Pump accumulative running time displaying
• Presenting one dry contact point (BA port) for BMS system
• Present RS485 port (A+ / B－)
• Remote monitor available (at option)

Main installation data
• Working temperature: -25℃– +55℃
• Working humidity: 20%–90%RH, no drips concreted
• Degree of protection: IP54
• Install position: Wall mounting
• Unit dimension (L x W x H): 302 x 240x 1 20mm

Digital Three Phase Water Pump Control Panel – Auto And Manual,00.75-15KW ,With One Button Calibration.

Products Brief :

L932 is applied for automatic liquid level control / pressure control and effective protection for duplex pumps of with AC380V, 50hz, single phase output power 0.75KW-15KW (1HP-20HP),direct start, including stainless steel or cast iron submersible pump,centrifugal pump, sewage pump etc.
Model L932 has many operation modes by adopting different electric installations. An important feature that makes the difference between Model L932 and common On/Off pump control box is the probe / sensor free in the well. Our special design makes it a very reliable and sensitive Protection against pump dry run without installation probe / sensor in the well.
Model L932 is useful in all cases we need to control and protect single pump managing its turn-on and turn off by different electric installations.

Main Technical Specifications
■Rated Input Voltage…………………………………………………AC380V / Three Phase
■ Rated Frequency…………………………………………50Hz-60Hz (at option)
■ Rated Output Power of Motor…………………0.75-4KW / 5.5-11KW/15KW(at option)
■ Open Phase Trip Response Time…….……………………2sec
■ Short Circuit Trip Response Time……………………………………………0.1sec
■ Dry Running Trip Response Time………………………………………………6sec
■ Over / Under Voltage Trip Response Time……………………………………5sec
■ Pump Stalled Trip Response Time……………………..………0.5sec
■ Over Current Trip Response Time……………………………………5sec-5min
■ Recovery Time of Over / Under Voltage……………………………………2min
■ Recovery Time of Over Current…………………………………………30min
■ Recovery Time of Dry Running.………………………………………………30min
■ Over / Under Voltage Trip……..……………………………….………………±15%
■ Dry Running Trip……………………………………………….70%
■ Pump Stalled Trip………………………………………….……………………200%

① the Characteristic of Inverse-time, the stronger of the current, The shorter of trip response time)
② Percent of rated input voltage ( i.e if the rated input voltage is 380V, the Over voltage trip is 437V, the Under voltage trip is 323V)
③ Percent of load time of calibration ( i.e if the running ampere of pump motor is 10A during the calibration, the dry running trip ampere is 7A)
④ Percent of load time of calibration ( i.e if the running ampere of pump motor is 10A during the calibration, The pump stalled trip ampere is 20A)

Model	L932
Main technical data
Start type	Direct on line
Qty of controlled pump	Two pumps
Rated input voltage:	AC380V Single phase 50HZ/ 60HZ
Rated output power:	0.75KW-15KW (1HP-20HP)
Capacitor:	N/M
Protection Offered:	Dry run Over load Transient surge Under voltage Over voltage Open phase Pump shaft rust protection Pump stalled Short circuit Over temp Three phase unbalance Phase reversal Repeated start
Application & Control characteristic	Control and protect universal pump Using water level sensor or float switch to control pump start and stop Applied for water supply by liquid level control through float switch or liquid probe Applied for water supply by pressure control through pressure switch and pressure tank Applied for drainage by liquid level control through float switch or liquid probe
Other features	Push button calibration Memory function when power off & recoveryInteractive LCD Screen
Main installation data
Working temperature Working humidity Degree of protection Install position Unit dimension (L x W x H)	-25℃– +55℃ 20%–90%RH, no drips concreted IP22 Wall mounting 1 70× 1 55× 8.5mm

Intelligent Single Phase Sewage Pump Controller – Auto And Manual,0.37-2.2KW

Model: L922-S

Products Brief :

Model L922/S is specially designed for sewage pumping system, by adopting level transmitter with 0.5-4.5V analog signal, pump user can easily set the different liquid depth for sewage pump operation and observe the dynamic liquid depth in the sump or sewage tank.

Typical usage scenarios include:
– Houses 　- Flats
– Holidays houses 　- Farms
– Industrial plants 　- Construction site

Main Technical Specifications
Rated Input Voltage…………………………………………………AC220V / Single Phase
■ Rated Frequency………………………………………………….……50Hz-60Hz (at option)
■ Rated Output Power of Motor……………………………0.37-2.2KW / 3-4KW(at option)
■ Short Circuit Trip Response Time……………………………………………………0.1sec
■ Dry Running Trip Response Time…………………………………………………… 6sec
■ Over / Under Voltage Trip Response Time……………………………………….….5sec
■ Pump Stalled Trip Response Time……………………..………………………………0.5sec
■ Over Current Trip Response Time………………………………………………5sec-5min
■ Recovery Time of Over / Under Voltage………………………………………..…….…2min
■ Recovery Time of Over Current…………………………………………………….…30min
■ Recovery Time of Dry Running.………………………………………………….…30min
■ Over / Under Voltage Trip……..……………………………….………………….….…±15%
■ Dry Running Trip……………………………………………….………………….…….….70%
■ Pump Stalled Trip………………………………………….……………………………..200%
① the Characteristic of Inverse-time, the stronger of the current, The shorter of trip response time)
② Percent of rated input voltage ( i.e if the rated input voltage is 220V, the Over voltage trip is
253V, the Under voltage trip is 187V)
③ Percent of load time of calibration ( i.e if the running ampere of pump motor is 6A during the
calibration, the dry running trip ampere is 4.2A)
④ Percent of load time of calibration ( i.e if the running ampere of pump motor is 6A during the calibration, The pump stalled trip ampere is 12A)

Application	Control & protect sewage / drainage pump only
Model	L922-S
Main technical data
.Start type	Direct on line
. Qty of controlled pump	Duplex pump
. Rated input voltage:	AC220V-240V Single phase 50HZ/ 60HZ
. Rated output power:	0.37kw-2.2kw (0.5hp-3hp) 3-4kw(4hp-5.5hp)
Protection function	Over load protection Pump stalled protection Dry run protection Under voltage protection Repeat start protection
Control characteristic	Connecting 0.5-4.5V level transmitter to replace float switch or level probe Duplex pump control .Main pump / standby pump automatically alternate .Main pump / standby pump automatically switch against malfunction .Standby pump participate running if required
Other features	LCD screen displaying dynamic real time depth & pump running status Pump shaft anti-rusty Pump accumulative running time recording Pump last five faults recording displaying Presenting one dry contact point (BA port) Present RS485 port Present user remote monitor LCD screen locked function under Auto state Push button calibration
Main installation data
Working temperature Working humidity Degree of protection Install position Unit dimension (L x W x H)	-25℃– +55℃ 20%–90%RH, no drips concreted IP54 Wall mounting 310 x 220x 1 20mm

ntelligent Single Phase Duplex Booster Pump Controller– Auto And Manual,0.37-2.2KW

Model: L922-B

Products Brief :

Model L922-B is specially designed for pressure booster pumping system, by adopting pressure transmitter (0.5-4.5V), pump user can easily set the different pressure value and observe the dynamic pressure value in the pipeline.

Typical usage scenarios include:
– Houses – Flats
– Holidays houses – Farms
– Water supply from wells – Industrial plants

Main Technical Specifications
Rated Input Voltage…………………………………………………AC220V / Single Phase
■ Rated Frequency………………………………………………….……50Hz-60Hz (at option)
■ Rated Output Power of Motor……………………………0.37-2.2KW / 3-4KW(at option)
■ Short Circuit Trip Response Time……………………………………………………0.1sec
■ Dry Running Trip Response Time…………………………………………………… 6sec
■ Over / Under Voltage Trip Response Time……………………………………….….5sec
■ Pump Stalled Trip Response Time……………………..………………………………0.5sec
■ Over Current Trip Response Time………………………………………………5sec-5min
■ Recovery Time of Over / Under Voltage………………………………………..…….…2min
■ Recovery Time of Over Current…………………………………………………….…30min
■ Recovery Time of Dry Running.………………………………………………….…30min
■ Over / Under Voltage Trip……..……………………………….………………….….…±15%
■ Dry Running Trip……………………………………………….………………….…….….70%
■ Pump Stalled Trip………………………………………….……………………………..200%

①the Characteristic of Inverse-time, the stronger of the current, The shorter of trip response time)
② Percent of rated input voltage ( i.e if the rated input voltage is 220V, the Over voltage trip is
253V, the Under voltage trip is 187V)
③ Percent of load time of calibration ( i.e if the running ampere of pump motor is 6A during the
calibration, the dry running trip ampere is 4.2A)
④ Percent of load time of calibration ( i.e if the running ampere of pump motor is 6A during the calibration, The pump stalled trip ampere is 12A)

Application	Control & protect booster pump only
Model	L922-B
Main technical data
.Start type	Direct on line
. Qty of controlled pump	Duplex pump
. Rated input voltage:	AC220V-240V Single phase 50HZ/ 60HZ
. Rated output power:	0.37kw-2.2kw (0.5hp-3hp) 3-4kw(4hp-5.5hp)
Protection function	Over load protection Pump stalled protection Dry run protection Under voltage protection Over voltage protection Repeat start protection
Control characteristic	Connecting 0.5-4.5V pressure transmitter to replace pressure switch Duplex pump control .Main pump / standby pump automatically alternate .Main pump / standby pump automatically switch against malfunction .Standby pump participate running if required
Other features	LCD screen displaying dynamic real time pressure value & pump running status Pump accumulative running time recording Pump last five faults record displaying Presenting one dry contact point (BA port) Present RS485 port Present user remote monitor LCD screen locked function under Auto state Push button calibration
Main installation data
Working temperature Working humidity Degree of protection Install position Unit dimension (L x W x H)	-25℃– +55℃ 20%–90%RH, no drips concreted IP54 Wall mounting 310 x 220x 1 20mm

Full Automatic Pump Control Panel , Start Type DOL , Single Phase

Product function / features :

Model	L922
Main technical data
.Start type	Direct on line
. Qty of controlled pump	Duplex pump
. Rated input voltage:	AC220V-240V Single phase 50HZ/ 60HZ
. Rated output power:	0.37kw-2.2kw (0.5hp-3hp) 3-4kw(4hp-5.5hp)
Protection function	Over load protection Pump stalled protection Dry run protectionwith sensor free Under voltage protection Over voltage protection Rapid cycle protection
Application	Control and protect universal pump Using water level sensor ,float switch or pressure switch to control pump start and stop Applied for water supply by liquid level control through float switch or liquid probe Applied for water supply by pressure control through pressure switch and pressure tank Applied for drainage by liquid level control through float switch or liquid probe
Control characteristic	Duplex pump control Build in function switch for water transfer ,booster and sewage lifting (drainage) .Main pump / standby pump automatically alternate .Main pump / standby pump automatically switch against malfunction .Standby pump participate running if required
Other features	Pump last five faults record displaying Pump accumulative running time displaying Pump shaft anti-rust Presenting one dry contact point (BA port) Present RS485 port Present user remote monitor
Main installation data
Working temperature Working humidity Degree of protection Install position Unit dimension (L x W x H)	-25℃– +55℃ 20%–90%RH, no drips concreted IP54 Wall mounting 310 x 220x 120mm

Our Service:
1.Payment Terms :we can accept payment by T/T ,L/C,PAYPAL
2.Delivery Terms :by sea ,by air ,DHL,TNT,UPS,FEDEX

Application :
Control and protect universal pump
Using water level sensor or float switch to control pump start and stop
Applied for water supply by liquid level control through float switch or liquid probe
Applied for water supply by pressure control through pressure switch and pressure tank
Applied for drainage by liquid level control through float switch or liquid probe

Typical usage scenarios include:
-Houses
-Flats
-Holidays houses
-Farms
-Water supply from wells
-Irrigations of greenhouses, gardens, agriculture
-Rain water reuse
-Industrial plants
-Waste water tank / Sewage sink

Main installation data:
Working temperature: -25 — +25 centigrade
Working humidity :20% — 90% RH, no drips concreted
Install position :Wall mounting
Degree of protection :IP54